{"id":494,"date":"2024-09-09T16:36:26","date_gmt":"2024-09-09T14:36:26","guid":{"rendered":"http:\/\/www.cams.it\/?page_id=494"},"modified":"2026-02-13T14:47:05","modified_gmt":"2026-02-13T13:47:05","slug":"250-3","status":"publish","type":"page","link":"https:\/\/www.cams.it\/?page_id=494&lang=de","title":{"rendered":"250de"},"content":{"rendered":"\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

STOSSMASCHINEN
\n250
\nRod and Crank system ram drive<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

TECHNICAL SPECIFICATIONS<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

MASCHINENRAHMEN<\/h3>

manufactured from electric arc welded sheet metal of robust thickness, adequately ribbed and heat treated for internal stress relieving.<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

KOPF UND ST\u00d6SSEL<\/h3>

G30 cast-iron. The head travelways are ground and hand scraped to ensure perfect ease of movement of the ram. The ram is driven by a self-braking asynchronous motor, reduction gear unit and crank assembly. Ram travel (stroke) is manually adjusted using the cam on the handwheel. The head tilts 20\u00b0 both clockwise and anti-clockwise and is the ideal solution for machining conical slots.<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

RECHTECKIGER TISCH<\/h3>

quality grade cast-iron with ground and scraped travel guides. Wide central hole to floor designed for machining long shafts.<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

quality grade cast-iron with wide central through hole designed for machining long shafts. The travelways on the table and support are ground and hand finished. Table rotation is driven by a worm screw-sprocket assembly (the worm screw is steel quality 18 NCM 5 hardened and ground and the sprocket is bronze quality B14) which incorporates a micrometric backlash recovery system. Maintenance free support guide thanks to an automatic greasing system.\u00a0 Computer controlled compressed-air driven rotation lock system during machining.<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

ACHSEN<\/h3>

tables with NC controlled axes are moved by ground and enclosed recirculating ball screw assemblies.\n<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

SCHMIERUNG<\/h3>

a timer controlled pump lubrication system. When the oil level drops below the minimum level machining stops automatically and an alarm prompt is activated.<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

K\u00dcHLSYSTEM<\/h3>

closed circuit system driven by a centrifugal electro-pump and a removable swarf collection tray is positioned below the table for easy access.<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

SAFETY PROTECTIONS<\/h3>

sheet metal and Plexiglas folding enclosure with front panel doors for easy access when the overhead crane positions the workpiece. Microswitch safety feature, in conformity with safety directives in force, is fitted to the enclosure to prevent opening during machining.<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

ELEKTRISCHE ANLAGE<\/h3>

Each axis is driven by a brushless motor and servo-drive with NC control. The NC control system allows easy machine programming even for complex workpieces. Electrics and wiring conform to the stringent safety directives.<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

STOSSMASCHINEN<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t\t
\"s_1ac_150_200_250_300_300m-1-3.png\"<\/figure><\/div>
\"250<\/figure><\/div>\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t\t
\n\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

STOSSMASCHINEN 250 1AC<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

1 NC controlled axis (axis Y) + 1 manual axis (axis X)<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Longitudinal Travel\nNC Controlled Axis Y<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Horizontal Travel\nManual Axis X<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t

\n\tDetails<\/span>\n\t\n\t\t\n\t\t\t\t\n\t\t<\/path><\/svg>\t<\/span>\n\t\t\t<\/span>\n\t\t\n\t\t\t\t\n\t\t<\/path><\/svg>\t<\/span>\n\t\t\t<\/span>\n\t<\/span>\n<\/h3>\n
\n\t
\n\t\t

Pre-programmed and reversible longitudinal slot machining and tool lift obtained by\u00a0 alternating\u00a0table\u00a0movement.<\/p>

Once the pre-programmed slot depth has been reached, in automatic the machine performs a number of finishing strokes and the ram stops in its top position and\u00a0 the workpiece table\u00a0 in automatic returns to machining start cycle position.<\/p>

Workpiece table\u00a0 with central through hole.<\/p>

20\u00b0 tilting head (in both directions).<\/p>

Inverter controlled\u00a0 variable stepless slotting speed with potentiometer incorporated in the control panel.\u00a0<\/p>

The machine incorporates an electro-pump for the tool cooling system and vacuum pump operated\u00a0 ram and trolley lubrication system.<\/p>

Maintenance tools and machine instruction manual are provided.<\/p>

Machine designed and manufactured to EC standards and directives.<\/strong><\/p>

\"\"<\/p>\t<\/div>\n<\/div>\n<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t\t
\"s_2actm_200_250_300_300m-edit-1-1.png\"<\/figure><\/div>
\"250<\/figure><\/div>\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t\t
\n\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

STOSSMASCHINEN 250 1ACT<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

1 NC controlled axis (axis y) + 2 manual axes (axes X \u2013 A)<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Longitudinal Travel\nNC Controlled Axis Y<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Turntable
\nManual Axis A<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Horizontal Travel\nManual Axis X<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t

\n\tDetails<\/span>\n\t\n\t\t\n\t\t\t\t\n\t\t<\/path><\/svg>\t<\/span>\n\t\t\t<\/span>\n\t\t\n\t\t\t\t\n\t\t<\/path><\/svg>\t<\/span>\n\t\t\t<\/span>\n\t<\/span>\n<\/h3>\n
\n\t
\n\t\t

Pre-programmed and reversible longitudinal slot machining and tool lift obtained by\u00a0alternating table movement.<\/p>

Once the pre-programmed slot depth has been reached, in automatic the machine performs a number of finishing strokes and the ram stops in its top position and\u00a0 the workpiece table\u00a0 in automatic returns to machining start cycle position.<\/p>

Manual turntable with central through hole to floor.<\/p>

20\u00b0 tilting head (in both directions).<\/p>

Inverter controlled\u00a0 variable stepless slotting speed with potentiometer incorporated in the control panel.<\/p>

The machine incorporates an electro-pump for the tool cooling system and vacuum pump operated\u00a0 ram and trolley lubrication system.<\/p>

Maintenance tools and machine instruction manual are provided.<\/p>

Machine designed and manufactured to EC standards and directives.<\/strong><\/p>

\"\"<\/p>\t<\/div>\n<\/div>\n<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t\t
\"s_2ac_200_250_300_300m-edit-3.png\"<\/figure><\/div>
\"250<\/figure><\/div>\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t\t
\n\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

STOSSMASCHINEN 250 2AC<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

2 NC controlled axes (axes Y \u2013 X)<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Longitudinal Travel\nNC Controlled Axis Y<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Horizontal Travel NC Controlled Axis X<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t

\n\tDetails<\/span>\n\t\n\t\t\n\t\t\t\t\n\t\t<\/path><\/svg>\t<\/span>\n\t\t\t<\/span>\n\t\t\n\t\t\t\t\n\t\t<\/path><\/svg>\t<\/span>\n\t\t\t<\/span>\n\t<\/span>\n<\/h3>\n
\n\t
\n\t\t

Automatic longitudinal and horizontal pre-programmed and reversible slot machining for any required slot depth and diameter.<\/p>

Tool lift obtained by alternating table movements.<\/p>

Once the pre-programmed slot depth has been reached, in automatic the machine performs a number of finishing strokes and the ram stops in its top position and\u00a0 the workpiece table\u00a0 in automatic returns to machining start cycle position.<\/p>

Workpiece table with central through hole to floor.\u00a0 Possibility of tilting head 20\u00b0 in both directions.<\/p>

Inverter controlled\u00a0 variable stepless slotting speed with potentiometer incorporated in the control panel.<\/p>

The machine incorporates an electro-pump for the tool cooling system and automatic timer controlled pump for ram and trolley lubrication.<\/p>

Maintenance tools and machine instruction manual are provided.<\/p>

Machine designed and manufactured to EC standards and directives.<\/strong><\/p>

\"\"<\/p>\t<\/div>\n<\/div>\n<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t\t
\"s_2act_200_250_300_300m-edit-4.png\"<\/figure><\/div>
\"tecnical.jpg\"<\/figure><\/div>
\"250<\/figure><\/div>\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t\t
\n\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

STOSSMASCHINEN 250 2ACT<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

2 NC controlled axis (axis Y-A) +1 manual axis (axis X)<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Longitudinal Travel\nNC Controlled Axis Y<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Horizontal Travel\nManual Axis X<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Turntable NC Controlled Axis A<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t

\n\tDetails<\/span>\n\t\n\t\t\n\t\t\t\t\n\t\t<\/path><\/svg>\t<\/span>\n\t\t\t<\/span>\n\t\t\n\t\t\t\t\n\t\t<\/path><\/svg>\t<\/span>\n\t\t\t<\/span>\n\t<\/span>\n<\/h3>\n
\n\t
\n\t\t

Pre-programmed and reversible longitudinal machining and tool lift obtained by\u00a0 alternating table movement.<\/p>

Once the pre-programmed slot depth has been reached, in automatic the machine performs a number of finishing strokes and the ram stops in its top position and the workpiece table\u00a0 in automatic returns to machining start cycle position.<\/p>

Electronic turntable with central through hole and with possibility of programming 1500 symmetrical\u00a0 and 99 asymmetrical divisions.<\/p>

20\u00b0 tilting head (in both directions).<\/p>

Inverter controlled\u00a0 variable stepless slotting speed with potentiometer incorporated in the control panel.<\/p>

The machine incorporates an electro-pump for the tool cooling system and automatic timer controlled pump for ram and trolley lubrication.<\/p>

Maintenance tools and machine instruction manual are provided.<\/p>

Machine designed and manufactured to EC standards and directives.
\u00a0<\/p>

\"\"<\/p>\t<\/div>\n<\/div>\n<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t\t
\"s_2actm_200_250_300_300m-edit-1-1.png\"<\/figure><\/div>
\"250<\/figure><\/div>\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t\t
\n\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

STOSSMASCHINEN 250 2ACTM<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

2 NC controlled axis (axes Y - X) + 1 manual axis (axis A)<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Longitudinal Travel\nNC Controlled Axis Y<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Horizontal Travel NC Controlled Axis X<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Turntable NC Controlled Axis A<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t

\n\tDetails<\/span>\n\t\n\t\t\n\t\t\t\t\n\t\t<\/path><\/svg>\t<\/span>\n\t\t\t<\/span>\n\t\t\n\t\t\t\t\n\t\t<\/path><\/svg>\t<\/span>\n\t\t\t<\/span>\n\t<\/span>\n<\/h3>\n
\n\t
\n\t\t

Automatic longitudinal and horizontal pre-programmed and reversible slot machining for any required slot depth and diameter.<\/p>

Tool lift obtained by alternating table movements.<\/p>

Once the pre-programmed slot depth has been reached, in automatic the machine performs a number of finishing strokes and the ram stops in its top position and\u00a0 the workpiece table\u00a0 in automatic returns to machining start cycle position.<\/p>

Manual turntable with central through hole to floor.<\/p>

20\u00b0 tilting head (in both directions).<\/p>

Inverter controlled\u00a0 variable stepless slotting speed with potentiometer incorporated in the control panel.<\/p>

The machine incorporates an electro-pump for the tool cooling system and automatic timer controlled pump for ram and trolley lubrication.<\/p>

Maintenance tools and machine instruction manual are provided.<\/p>

Machine designed and manufactured to EC standards and directives.<\/strong><\/p>

\"\"<\/p>\t<\/div>\n<\/div>\n<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t\t
\"s_3ac_200_250_300_300m-edit-4.png\"<\/figure><\/div>
\"250<\/figure><\/div>\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t\t
\n\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

STOSSMASCHINEN 250 3AC<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

3 NC controlled axes (Y \u2013 X \u2013 A)<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Longitudinal Travel\nNC Controlled Axis Y<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Horizontal Travel NC Controlled Axis X<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Turntable NC Controlled Axis A<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t

\n\tDetails<\/span>\n\t\n\t\t\n\t\t\t\t\n\t\t<\/path><\/svg>\t<\/span>\n\t\t\t<\/span>\n\t\t\n\t\t\t\t\n\t\t<\/path><\/svg>\t<\/span>\n\t\t\t<\/span>\n\t<\/span>\n<\/h3>\n
\n\t
\n\t\t

Automatic longitudinal and horizontal pre-programmed and reversible slot machining and automatic rotation of turntable\u00a0for any required slot depth and diameter.<\/p>

Tool lift obtained by alternating table movements.<\/p>

Once the pre-programmed slot depth has been reached, in automatic the machine performs a number of finishing strokes and the ram stops in its top position and\u00a0 the workpiece table\u00a0 in automatic returns to machining start cycle position.<\/p>

Electronic turntable with central through hole to floor with possibility of programming 1500 symmetrical\u00a0 and 999 asymmetrical divisions.<\/p>

Possibility of machining specific trapezoidal, circular and linear slots.<\/p>

The incorporated NC technology provides a user friendly\u00a0 operator\/machine interface, the operator can call up data on the display utilising the keypad, enter production data.<\/p>

The type of technology incorporated is easy and simple to use.<\/p>

Machining programmes with zero workpiece position can be saved and stored and called up when required. It is possible to store up to 100 programmes.<\/p>

This model can run in automatic two or more programmes in sequence.<\/p>

The software offers the following standard applications:<\/p>

\u2022 slot repeat:<\/strong>\u00a0 this function is for repeating slot machining without having to proceed with machine setup.<\/p>

\u2022 incremental tool lift:<\/strong>\u00a0 with this function enabled the tool is completely raised out of the slot when the ram returns\u00a0 and returns to zero workpiece position.<\/p>

If required, it is possible to add and incorporate\u00a0 specific software functions and applications:<\/p>

\u2022 slot bottom finishing:<\/strong>\u00a0 in the event the slot is widened the operator has the possibility of milling the bottom of the slot to finish.<\/p>

\u2022 slot side finishing:<\/strong>\u00a0 this function is for widening the slot by milling and finishing the sides.<\/p>

\u2022 decreasing tool feed:<\/strong>\u00a0 this function allows the operator to automatically modify tool feed (machining) using two specific values initial and final tool feed.\u00a0 This function is enabled by entering the two tool feed values.<\/p>

\u2022 air blow:<\/strong>\u00a0 ideal when machining slots in blind holes.\u00a0 At a defined number of ram strokes a solenoid valve is activated and air is blown onto the workpiece to remove swarf during machining.\u00a0 The operator also has the possibility of setting the function operating time.<\/p>

\u2022 chamfering:<\/strong>\u00a0 once having machined the slot it is possible with this function to chamfer slot edges to 45\u00b0 in automatic.<\/p>

\u2022 tangential slots:<\/strong>\u00a0\u00a0this function allows the operator to machine in automatic two or more UNI 7515-76 tangential slots of any width.<\/p>

20\u00b0 tilting head (in both directions).\u00a0 Inverter controlled\u00a0 variable stepless slotting speed with potentiometer incorporated in the control panel.\u00a0\u00a0 The machine incorporates an electro-pump for the tool cooling system and automatic pump for ram and trolley lubrication. Maintenance tools and machine instruction manual are provided.<\/p>

Machine designed and manufactured to EC standards and directives.<\/strong><\/p>

\"\"<\/p>\t<\/div>\n<\/div>\n<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t\t
\"s_4ac_250_300_300m-edit-2.png\"<\/figure><\/div>
\"250<\/figure><\/div>\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t\t
\n\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

STOSSMASCHINEN 250 4AC<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

4 NC controlled axes (Y \u2013 X \u2013 A - Z)<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Longitudinal Travel\nNC Controlled Axis Y<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Horizontal Travel NC Controlled Axis X<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Turntable NC Controlled Axis A<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Ram Axis<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t

\n\tDetails<\/span>\n\t\n\t\t\n\t\t\t\t\n\t\t<\/path><\/svg>\t<\/span>\n\t\t\t<\/span>\n\t\t\n\t\t\t\t\n\t\t<\/path><\/svg>\t<\/span>\n\t\t\t<\/span>\n\t<\/span>\n<\/h3>\n
\n\t
\n\t\t

Automatic longitudinal and horizontal pre-programmed and reversible slot machining and automatic rotation of turntable\u00a0for any required slot depth and diameter.<\/p>

Tool lift obtained by alternating table movements.<\/p>

Once the pre-programmed slot depth has been reached, in automatic the machine performs a number of finishing strokes and the ram stops in its top position and\u00a0 the workpiece table\u00a0 in automatic returns to machining start cycle position.<\/p>

Electronic turntable with central through hole to floor with possibility of programming 1500 symmetrical\u00a0 and 999 asymmetrical divisions.<\/p>

Possibility of machining specific trapezoidal, circular and linear slots.

The incorporated NC technology provides a user friendly\u00a0 operator \/ machine interface, the operator can call up data on the 10.4 \" colour monitor utilising the keypad.<\/p>

The operator can store different machining programmes with zero workpiece position.<\/p>

The NC system can store up to 100 programmes.<\/p>

This model also incorporates the traditional ram drive assembly consisting of a NC controlled piston transforming the ram axis into a NC machining axis for machining front conical slots and for running programmes in sequence in automatic with different machining speeds.<\/p>

The software offers the following\u00a0standard applications:<\/p>

\u2022 slot repeat:<\/strong>\u00a0 this function is for repeating slot machining without having to proceed with machine setup.<\/p>

\u2022 incremental tool lift:<\/strong>\u00a0 with this function enabled the tool is completely raised out of the slot when the ram returns\u00a0 and returns to zero workpiece position.<\/p>

\u2022 slot bottom finishing:<\/strong>\u00a0 in the event the slot is widened the operator has the possibility of milling the bottom of the slot to finish.<\/p>

\u2022 slot side finishing:<\/strong>\u00a0 this function is for widening the slot by milling and finishing the sides.<\/p>

\u2022 adjustable tool feed per sector:<\/strong>\u00a0\u00a0this function is for running machining programmes with adjustable machining speed and tool feed across 3 levels.<\/p>

brushless\u00a0ram drive motor<\/p>

\u2022 machine software\u00a0can be customised<\/strong>\u00a0to run programmes for machining conical slots and keys without tilting the head to obtain minimum inclinations and widths.<\/p>

If required and upon request, it is possible to add and incorporate\u00a0 specific software functions and applications:<\/p>

\u2022 decreasing tool feed:<\/strong>\u00a0 ideal for machining conical slots by utilising a larger initial tool feed and to end machining with a smaller tool feed value. This function is NC controlled.<\/p>

\u2022 air blow:<\/strong>\u00a0 ideal for machining slots in blind holes. At a defined number of ram strokes a solenoid valve is activated and air is blown onto the workpiece to remove swarf during machining.\u00a0 The operator also has the possibility of setting the operating duration (time).<\/p>

\u2022 chamfering:<\/strong>\u00a0 once having machined the slot it is possible with this function to chamfer slot edges to 45\u00b0 in automatic.<\/p>

\u2022 tangential slots:<\/strong>\u00a0 this function allows the operator to machine in automatic two or more UNI 7515-76 tangential slots of any width.<\/p>

20\u00b0 tilting head (in both directions). Inverter controlled\u00a0 variable stepless slotting speed with potentiometer incorporated in the control panel. The machine incorporates an electro-pump for the tool cooling system and automatic pump for ram and trolley lubrication.<\/p>

Maintenance tools and machine instruction manual are provided.<\/p>

Machine designed and manufactured to EC standards and directives.<\/strong><\/p>

\"\"<\/p>\t<\/div>\n<\/div>\n<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

STOSSMASCHINEN 250 Rod and Crank system ram drive TECHNICAL SPECIFICATIONS MASCHINENRAHMEN manufactured from electric arc welded sheet metal of robust […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"site-sidebar-layout":"no-sidebar","site-content-layout":"","ast-site-content-layout":"full-width-container","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"disabled","ast-breadcrumbs-content":"","ast-featured-img":"disabled","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"class_list":["post-494","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.cams.it\/index.php?rest_route=\/wp\/v2\/pages\/494","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.cams.it\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.cams.it\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.cams.it\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.cams.it\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=494"}],"version-history":[{"count":26,"href":"https:\/\/www.cams.it\/index.php?rest_route=\/wp\/v2\/pages\/494\/revisions"}],"predecessor-version":[{"id":1949,"href":"https:\/\/www.cams.it\/index.php?rest_route=\/wp\/v2\/pages\/494\/revisions\/1949"}],"wp:attachment":[{"href":"https:\/\/www.cams.it\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=494"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}