{"id":541,"date":"2024-09-10T14:45:08","date_gmt":"2024-09-10T12:45:08","guid":{"rendered":"http:\/\/www.cams.it\/?page_id=541"},"modified":"2026-02-11T16:50:44","modified_gmt":"2026-02-11T15:50:44","slug":"400-4","status":"publish","type":"page","link":"https:\/\/www.cams.it\/?page_id=541","title":{"rendered":"400in"},"content":{"rendered":"\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Slotting Machines
\n400
\nRod and Crank system ram drive<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Slotting Machines<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t\t
\"s_xac_500_500a_500a850-edit-5.png\"<\/figure><\/div>
\"400<\/figure><\/div>\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t\t
\n\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

slotting machine 400 (500) 2AC<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

2 NC controlled axes (axes Y \u2013 X)<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Longitudinal Travel\nNC Controlled Axis Y<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Horizontal Travel\nNC Controlled Axis X<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t

\n\tDetails<\/span>\n\t\n\t\t\n\t\t\t\t\n\t\t<\/path><\/svg>\t<\/span>\n\t\t\t<\/span>\n\t\t\n\t\t\t\t\n\t\t<\/path><\/svg>\t<\/span>\n\t\t\t<\/span>\n\t<\/span>\n<\/h3>\n
\n\t
\n\t\t

Automatic longitudinal and horizontal pre-programmed and reversible slot machining for any required slot depth and diameter.<\/p>

Tool lift obtained by alternating table movements.<\/p>

Once the pre-programmed slot depth has been reached, in automatic the machine performs a number of finishing strokes and the ram stops in its top position and\u00a0 the workpiece table\u00a0 in automatic returns to machining start cycle position.<\/p>

Workpiece table with central through hole to floor.<\/p>

Possibility of tilting head 20\u00b0 in both directions.<\/p>

Inverter controlled\u00a0 variable stepless slotting speed with potentiometer incorporated in the control panel.<\/p>

The machine incorporates an electro-pump for the tool cooling system and automatic timer controlled pump for ram and trolley lubrication.<\/p>

Maintenance tools and machine instruction manual are provided.<\/p>

Machine designed and manufactured to EC standards and directives.<\/strong><\/p>

\"\"<\/p>\t<\/div>\n<\/div>\n<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t\t
\"s_xac_500_500a_500a850-edit-5.png\"<\/figure><\/div>
\"400<\/figure><\/div>\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t\t
\n\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

slotting machine 400 (500) 3AC<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

3 NC controlled axes (Y \u2013 X \u2013 A)<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Longitudinal Travel\nNC Controlled Axis Y<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Horizontal Travel\nNC Controlled Axis X<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Turntable\nNC Controlled Axis A<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t

\n\tDetails<\/span>\n\t\n\t\t\n\t\t\t\t\n\t\t<\/path><\/svg>\t<\/span>\n\t\t\t<\/span>\n\t\t\n\t\t\t\t\n\t\t<\/path><\/svg>\t<\/span>\n\t\t\t<\/span>\n\t<\/span>\n<\/h3>\n
\n\t
\n\t\t

Automatic longitudinal and horizontal pre-programmed and reversible slot machining and automatic rotation of turntable for any required slot depth and diameter. \u00a0<\/p>

Tool lift obtained by alternating table movements. \u00a0<\/p>

Once the pre-programmed slot depth has been reached, in automatic the machine performs a number of finishing strokes and the ram stops in its top position and\u00a0 the workpiece table\u00a0 in automatic returns to machining start cycle position.\u00a0 \u00a0<\/p>

Electronic turntable with central through hole to floor with possibility of programming 1500 symmetrical\u00a0 and 999 asymmetrical divisions.\u00a0 \u00a0<\/p>

Possibility of machining specific trapezoidal, circular and linear slots.\u00a0 \u00a0<\/p>

The incorporated NC technology provides a user friendly\u00a0 operator\/machine interface, the operator can call up data on the display utilising the keypad, enter production data. The type of technology incorporated is easy and simple to use. \u00a0<\/p>

Machining programmes with zero workpiece position can be saved and stored and called up when required. It is possible to store up to 100 programmes.<\/p>

This model can run in automatic\u00a0 two or more programmes in sequence.<\/p>

The software offers the following standard applications:<\/p>

\u2022 slot repeat:<\/strong>\u00a0 this function is for repeating slot machining without having to proceed with machine setup.<\/p>

\u2022 incremental tool lift:<\/strong>\u00a0 with this function enabled the tool is completely raised out of the slot when the ram returns\u00a0 and returns to zero workpiece position.<\/p>

If required, it is possible to add and incorporate\u00a0 specific software functions and applications:<\/p>

\u2022 slot bottom finishing:<\/strong>\u00a0 in the event the slot is widened the operator has the possibility of milling the bottom of the slot to finish.<\/p>

\u2022 slot side finishing:<\/strong>\u00a0 this function is for widening the slot by milling and finishing the sides.<\/p>

\u2022 decreasing tool feed:<\/strong>\u00a0 this function allows the operator to automatically modify tool feed (machining) using two specific values initial and final tool feed.\u00a0 This function is enabled by entering the two tool feed values.<\/p>

\u2022 air blow:<\/strong>\u00a0 ideal when machining slots in blind holes.\u00a0 At a defined number of ram strokes a solenoid valve is activated and air is blown onto the workpiece to remove swarf during machining.\u00a0 The operator also has the possibility of setting the function operating time.\u00a0<\/p>

\u2022 chamfering:<\/strong>\u00a0 once having machined the slot it is possible with this function to chamfer slot edges to 45\u00b0 in automatic.<\/p>

\u2022 tangential slots:<\/strong>\u00a0\u00a0this function allows the operator to machine in automatic two or more UNI 7515-76 tangential slots of any width.<\/p>

20\u00b0 tilting head (in both directions).\u00a0 Inverter controlled\u00a0 variable stepless slotting speed with potentiometer incorporated in the control panel. The machine incorporates an electro-pump for the tool cooling system and automatic pump for ram and trolley lubrication. Maintenance tools and machine instruction manual are provided.<\/p>

Machine designed and manufactured to EC standards and directives.<\/strong><\/p>

\"\"<\/p>\t<\/div>\n<\/div>\n<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t\t
\"s_xac_500_500a_500a850-edit-5.png\"<\/figure><\/div>
\"400<\/figure><\/div>\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t\t
\n\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

slotting machine 400 2AC<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

2 NC controlled axes (axes Y \u2013 X)<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Longitudinal Travel\nNC Controlled Axis Y<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Horizontal Travel\nNC Controlled Axis X<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t

\n\tDetails<\/span>\n\t\n\t\t\n\t\t\t\t\n\t\t<\/path><\/svg>\t<\/span>\n\t\t\t<\/span>\n\t\t\n\t\t\t\t\n\t\t<\/path><\/svg>\t<\/span>\n\t\t\t<\/span>\n\t<\/span>\n<\/h3>\n
\n\t
\n\t\t

Automatic longitudinal and horizontal pre-programmed and reversible slot machining for any required slot depth and diameter.<\/p>

Tool lift obtained by alternating table movements.<\/p>

Once the pre-programmed slot depth has been reached, in automatic the machine performs a number of finishing strokes and the ram stops in its top position and\u00a0 the workpiece table\u00a0 in automatic returns to machining start cycle position.<\/p>

Workpiece table with central through hole to floor.<\/p>

Possibility of tilting head 20\u00b0 in both directions.<\/p>

Inverter controlled\u00a0 variable stepless slotting speed with potentiometer incorporated in the control panel.<\/p>

The machine incorporates an electro-pump for the tool cooling system and automatic timer controlled pump for ram and trolley lubrication.<\/p>

Maintenance tools and machine instruction manual are provided.<\/p>

Machine designed and manufactured to EC standards and directives.<\/strong><\/p>

\"\"<\/p>\t<\/div>\n<\/div>\n<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t\t
\"s_xac_500_500a_500a850-edit-5.png\"<\/figure><\/div>
\"400<\/figure><\/div>\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t\t
\n\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

slotting machine 400 3AC<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

3 NC controlled axes (Y \u2013 X \u2013 A)<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Longitudinal Travel\nNC Controlled Axis Y<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Turntable\nNC Controlled Axis A<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\"\"<\/figure>

Horizontal Travel\nNC Controlled Axis X<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t

\n\tDetails<\/span>\n\t\n\t\t\n\t\t\t\t\n\t\t<\/path><\/svg>\t<\/span>\n\t\t\t<\/span>\n\t\t\n\t\t\t\t\n\t\t<\/path><\/svg>\t<\/span>\n\t\t\t<\/span>\n\t<\/span>\n<\/h3>\n
\n\t
\n\t\t

Automatic longitudinal and horizontal pre-programmed and reversible slot machining and automatic rotation of turntable\u00a0 for any required slot depth and diameter. \u00a0<\/p>

Tool lift obtained by alternating table movements. \u00a0<\/p>

Once the pre-programmed slot depth has been reached, in automatic the machine performs a number of finishing strokes and the ram stops in its top position and\u00a0 the workpiece table\u00a0 in automatic returns to machining start cycle position.\u00a0 \u00a0<\/p>

Electronic turntable with central through hole to floor with possibility of programming 1500 symmetrical\u00a0 and 999 asymmetrical divisions.\u00a0 \u00a0<\/p>

Possibility of machining specific trapezoidal, circular and linear slots.\u00a0 \u00a0<\/p>

The incorporated NC technology provides a user friendly\u00a0 operator\/machine interface, the operator can call up data on the display utilising the keypad, enter production data. The type of technology incorporated is easy and simple to use. \u00a0<\/p>

Machining programmes with zero workpiece position can be saved and stored and called up when required. It is possible to store up to 100 programmes.<\/p>

This model can run in automatic\u00a0 two or more programmes in sequence.<\/p>

The software offers the following standard applications:<\/p>

\u2022 slot repeat:<\/strong>\u00a0 this function is for repeating slot machining without having to proceed with machine setup.<\/p>

\u2022 incremental tool lift:<\/strong>\u00a0 with this function enabled the tool is completely raised out of the slot when the ram returns\u00a0 and returns to zero workpiece position.<\/p>

If required, it is possible to add and incorporate\u00a0 specific software functions and applications:<\/p>

\u2022 slot bottom finishing:<\/strong>\u00a0 in the event the slot is widened the operator has the possibility of milling the bottom of the slot to finish.<\/p>

\u2022 slot side finishing:<\/strong>\u00a0 this function is for widening the slot by milling and finishing the sides.<\/p>

\u2022 decreasing tool feed:<\/strong>\u00a0 this function allows the operator to automatically modify tool feed (machining) using two specific values initial and final tool feed.\u00a0 This function is enabled by entering the two tool feed values.<\/p>

\u2022 air blow:<\/strong>\u00a0 ideal when machining slots in blind holes.\u00a0 At a defined number of ram strokes a solenoid valve is activated and air is blown onto the workpiece to remove swarf during machining.\u00a0 The operator also has the possibility of setting the function operating time.\u00a0<\/p>

\u2022 chamfering:\u00a0<\/strong>\u00a0once having machined the slot it is possible with this function to chamfer slot edges to 45\u00b0 in automatic.<\/p>

\u2022 tangential slots:<\/strong>\u00a0\u00a0this function allows the operator to machine in automatic two or more UNI 7515-76 tangential slots of any width.<\/p>

20\u00b0 tilting head (in both directions).\u00a0 Inverter controlled\u00a0 variable stepless slotting speed with potentiometer incorporated in the control panel.The machine incorporates an electro-pump for the tool cooling system and automatic pump for ram and trolley lubrication.\u00a0Maintenance tools and machine instruction manual are provided.<\/p>

Machine designed and manufactured to EC standards and directives.<\/strong><\/p>

\"\"<\/p>\t<\/div>\n<\/div>\n<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

Slotting Machines 400 Rod and Crank system ram drive Slotting Machines slotting machine 400 (500) 2AC 2 NC controlled axes […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"site-sidebar-layout":"no-sidebar","site-content-layout":"","ast-site-content-layout":"full-width-container","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"disabled","ast-breadcrumbs-content":"","ast-featured-img":"disabled","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"class_list":["post-541","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.cams.it\/index.php?rest_route=\/wp\/v2\/pages\/541","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.cams.it\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.cams.it\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.cams.it\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.cams.it\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=541"}],"version-history":[{"count":29,"href":"https:\/\/www.cams.it\/index.php?rest_route=\/wp\/v2\/pages\/541\/revisions"}],"predecessor-version":[{"id":1882,"href":"https:\/\/www.cams.it\/index.php?rest_route=\/wp\/v2\/pages\/541\/revisions\/1882"}],"wp:attachment":[{"href":"https:\/\/www.cams.it\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=541"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}